If you’re looking for a home repair and remodeling job, or even the replacement of your existing roof, chances are you’ve been asked to look at the roof to see if you can safely remove the existing roof sealant. Often, this sealant is glued on and can’t be removed without damaging the roof itself. The question you have to ask yourself is – how do use Silicone sealant remover, like the ones from CT1 for a roof? The actual process isn’t very complicated, but there are specific ways to go about it that will prevent you from damaging your roof or worse. Here’s how you remove silicone sealant from a roof.
The first thing you need to do when learning how you remove silicone sealant from a roof is to remove all the excess sealant. Once you’ve done this, it’s time to work on removing the gasket from around the edge of the roof. This gasket can be rather tricky to remove, so make sure you follow the directions on the package very carefully – you don’t want to damage your roof by making a mistake like this!
Once you’ve removed the gasket, it’s time to remove the old roof sealant. Make sure to wear thick gloves and rubber soles to prevent any scratches to your tools as you remove it. If you have to use a ladder, then go at the top. After getting to the bottom, simply lift the sealant from the roof above and continue to remove the sealant. You may find that you need to work on your roof for a bit while removing the sealant, but if you keep everything clean and dry, you should be able to remove it without too much trouble.